Recorder bar, Clip information fields – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 29
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
16
Use the buttons
and
to go respectively to the Mark IN or Mark OUT
frames.
R
ECORDER BAR
The Recorder bar shows the linked recording channel on the XT server.
The device can be changed by right-clicking the blue bar and selecting a device
from the list that appears or by dragging a record channel from the Channel
Explorer. This selection is required to be able to initiate the Auto-Edit or Bach
Digitize modes.
Note
A default recorder can be defined in the VTR Engine configuration. If a
default recorder channel is associated, it is automatically assigned
when selecting a VTR channel.
C
LIP
I
NFORMATION FIELDS
Field Name
Instructions
Clip Name
Enter a name for the clip here.
Level
Select a level for the clip.
Tape ID
Enter a Tape ID, according to the label on the tape in the
VTR.
Type
Select the appropriate type for the clip.