19 using keywords & metadata, 1 how to add a keyword to a clip, 2 how to delete one or more keywords from a clip – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 99: 1 on, How to add a keyword to a clip, 2 “how to delete one or more keywords from a clip
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
86
4.19 USING KEYWORDS & METADATA
4.19.1 H
OW TO
A
DD A
K
EYWORD TO A
C
LIP
You can add up to three keywords to a clip from the Control Panel.
To add a keyword to a clip, proceed as follows:
1.
Open the clip in the Control Panel.
2.
Select the full view to display the Clip Information tab.
3.
Open the Keyword Grid or Dictionary from the Keyword icon in the
Shortcut bar.
4.
Click again on the Clip Information tab to associate the clip to the grid or
dictionary.
The Apply button becomes active in the grid or dictionary.
5.
Select the keywords from the grid or dictionary.
6.
Click the Update Clip button on the Control Panel to save the defined
keywords.
The keywords are displayed in green in the grid or dictionary and are
automatically added to the Keyword List in the Control Panel.
4.19.2 H
OW TO
D
ELETE
O
NE OR
M
ORE
K
EYWORDS
F
ROM A
C
LIP
The keywords defined on a clip can be deleted in the Control Panel.
To delete one keyword from a clip, proceed as follows:
1.
Open the clip in the Control Panel.
2.
Select the full view to display the Clip Information tab.
3.
Select the keyword to be deleted on the Keyword List field
4.
Right-click and select Remove the Selected Keyword(s) from the
contextual menu.
5.
Click the Update Clip button on the Control Panel to save the changes.
The selected keyword is deleted from the keyword list.
If you want to delete all the keywords assigned to a clip, proceed in the same way
except that you select the Remove All Keywords option from the contextual
menu.