How to add a predefined configuration – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 173
Advertising
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
160
H
OW TO
A
DD A
P
REDEFINED
C
ONFIGURATION
To add a configuration, proceed as follows:
1.
Select the Add button.
The Add an Audio Swap Configuration dialog box opens:
2.
Type a name for the new configuration in the dialog box.
3.
Click on a crosspoint on the grid to define the output track each input
would be played from.
4.
Save the new settings when all crosspoint changes have been
completed.
Advertising