EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 28)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
15
3.4 VTR CONTROL PANEL MODE 2: AUTO-
EDIT MODE
3.4.1 P
URPOSE
In Auto-edit Mode , a single clip can be digitized from the VTR to a record
channel on an XT server. In the auto-edit process, clips can be sent to different
destinations and published to user groups.
3.4.2 S
CREEN ELEMENTS AND FUNCTIONS
The Transport Mode buttons and controls remain the same in Auto-Edit Mode.
Refer to section 3.3 “VTR Control Panel Mode 1: Transport Mode”, on page 12 for
details.
The extra fields and buttons for Auto-Edit Mode are explained below.
M
ARK
IN - D
URATION
- M
ARK
OUT
The Mark IN, Duration and Mark OUT fields are editable.
Values can be entered directly from the keyboard. After entering two values, the
third value is calculated automatically.
M
ARK
IN / M
ARK
OUT
BUTTONS
Instead of entering values in the Mark IN - Duration - Mark OUT fields, these
values can be set by clicking the Mark IN and Mark OUT buttons while the tape is
playing.
Existing values can be cleared by clicking the corresponding button.