14 snap icon, 15 ret icon, 13 d – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 54: 14 s, 15 r
![background image](/manuals/254267/54/background.png)
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
41
4.5.13 D
IRECT
A
CCESS
B
UTTONS TO THE
T
RAINS ON THE
S
HUTTLE
PRO
There are also direct access buttons on the ShuttlePRO controller to select trains
on a channel:
PREVIOUS TRAIN: Selects the previously selected Record train, pressing twice
moves back another selection, etc…
NEXT TRAIN: Selects the next Record train, if on the ‘cam A’ train it will move to
‘cam B’, etc…
SELECT TRAIN: Calls up on the screen a list of channels available. By moving the
jog dial you can move through the list to highlight the required train and press
Select Train again to select it and exit the menu.
4.5.14 S
NAP
I
CON
OR
OR
Returns the media to the last point where the E/E mode was exited, effectively
“snapping” back to where the user left off in the record material.
4.5.15 R
ET
I
CON
OR
OR
The button becomes active if the channel is within a clip. By pressing it, the same
frame of media will be loaded from the original record train, if it is still available