Adding predefined audio swap configurations – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 150
![background image](/manuals/254267/150/background.png)
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
137
Adding predefined audio swap configurations
Initially there will only be one configuration type selectable “Customize”.
Additional configurations for a predefined audio swap type are configured in the
Tools > settings > Play-List – predefined values tab, please refer to Predefined
Audio Swap Configuration, on page 159 for more information.
Using the Customize Option to Set up an Audio Swap Tag
Type
Select “Customize” and the default “one to one” audio configuration is displayed in
preparation for a configuration to be made. By clicking on a crosspoint on the grid,
the marker will be moved to the new position and the reference field next to the
grid shows the tracks involved in the transition, for example ‘ A1->A1’ changes to ‘
A1->A3’
The audio swap mix duration can also be defined for the swaps declared. Limit
values are 00s00 to 20s00.
When the operator clicks on OK, the selection is validated and displayed in the
corresponding tag description with the selected audio mix duration.