2 how to load a clip in the control panel, 3 how to load a play-list in the clip-list tab, In the clip-list tab – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 89: 3 “how to load a play-list in the clip-list tab
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
76
4.16.2 H
OW TO
L
OAD A
C
LIP IN THE
C
ONTROL
P
ANEL
To load a clip to a channel from the Database Explorer, proceed as follows:
1.
Open the Database Explorer from the main menu.
2.
Select the requested clip in the Clips pane of the Database Explorer.
3.
Drag it to the Control Panel you wish to load it on.
To load a clip to a channel from the Control Panel, proceed in one of the following
ways:
•
Enter the clip name in the Name field of the Control panel and press Enter.
•
Enter the clip number and location in the LSM ID field, for example 000A/02 and
press Enter.
4.16.3 H
OW TO
L
OAD A
P
LAY
-L
IST IN THE
C
LIP
-L
IST
T
AB
Off-line or on-line play-lists can be loaded in the Clip-List tab. In this process, off-
line play-lists will automatically become on-line and distant play-lists will
automatically be copied to the XT of the controlled channel.
There are several ways to load a play-list into the Control Panel:
I
N THE
C
LIP
-L
IST
T
AB
You can load a play-list in the Clip-List tab if you know the play-list name or LSM
ID.
To load the play-list by means of the play-list name, proceed as follows:
1.
Click on the Name field in the Clip-List tab.
The field value is highlighted in blue.
2.
Enter the full name of the play-list to be loaded (no case-sensitivity).
3.
Press ENTER.
To load the play-list by means of the play-list LSM ID, proceed as follows:
1.
Click on the LSM ID field (on the right of the Name field) in the Clip-List
tab.
The field value is highlighted in blue.
2.
Enter the LSM ID of the play-list to be loaded.
3.
Press ENTER.