Trains, Clips, Go to in/out and sync all t/c – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 71: Ransport, Ommand, Ynchronization, Anged, Layer, Hannels
![background image](/manuals/254267/71/background.png)
Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
58
4.10.2 T
RANSPORT
C
OMMAND
S
YNCHRONIZATION
O
N
G
ANGED
P
LAYER
C
HANNELS
T
RAINS
When live or stopped record trains are loaded on ganged player channels, the
NEXT and PREVIOUS commands executed on one PGM by means of the
ShuttlePRO are only applied on this PGM:
•
If the train belongs to a group of ganged recorders, the application shifts to the
next or previous record train of the group.
•
If the train does not belong to a group of ganged recorders, the application
shifts to the next or previous record train of the SDTI network.
Trains A,B,C
belonging
to a group of
ganged recorders
or to the netw
ork
C
LIPS
GO TO IN/OUT and SYNC ALL T/C
When linked or non linked clips are loaded on ganged player channels, the GO TO
IN, GO TO OUT and the SYNC ALL T/C are applied to all clips loaded on the
ganged player channels.
With the SYNC ALL T/C command, all clips on ganged channels are loaded on the
same TC as the clip loaded on the main channel. The main channel is the channel
where the command is applied.