7 clear out, 8 update clip icon, 9 new clip icon – EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual User Manual
Page 58: Lear, Pdate
IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
45
4.6.7 C
LEAR
OUT
OR
If you select the cross next to the Mark OUT icon, the following happens:
•
The OUT point will be cleared and the Short OUT field reset if an OUT point was
marked on a live record chain.
•
The timecode for the maximum clip OUT value including guardbands is
displayed if an OUT point was marked on a clip.
4.6.8 U
PDATE
C
LIP
I
CON
OR
If a clip that is loaded to a channel has had a change made to the IN, OUT, NAME,
or other data entered when originally saved, pressing Update Clip will save the
new settings.
The update clip operation can also be done using the shuttle pro:
Press
on the keyboard and
Note
The update command will not be available if the user rights restrict
editing of the clip currently loaded on the Control Panel.
4.6.9 N
EW
C
LIP
I
CON
OR
OR
Once an IN and OUT have been set, selecting the New Clip icon will make create
the new clip. The clip will be saved in one of the following ways depending on the