EVS IPDirector Version 4.4 - March 2008 Part 3 User's Manual - Manual (Page 142)

IP Director Version 4.4 – User Manual – Part 3: Ingest and Play-Out
EVS Broadcast Equipment – March 2008
Issue 4.4.C
129
on the corresponding XT server (the one the play-list is to be played on). The
GPI number and its trigger mode are defined in the general settings, GPI
section.
When On GPI is selected, the corresponding GPI, which has been configured to
start a PLAY command on the on-air channel associated to the play-list tab, is
displayed in the description field.
If no GPI has been configured to start a PLAY on the on-air channel, a warning
message is displayed in RED in the description field.
If no on-air channel is defined, a warning message is displayed in RED in the
description field:
• On Time, at: the selected element will start at the defined time.
The element will only be started if the element is on-air at the specified time
(independently of the date).
The element will start playing using the parameters defined in the play-list relating
to the element.
Note
If Automatically was selected when a start mode is defined (Manually,
on GPI, On Time, at), the still mode will default to the ‘stop on Last
frame of previous clip’ mode.
Manual Override on Start mode settings
If the start mode has been defined On GPI, or On Time, at, it is still possible to
manually start the element by pressing PLAY.
R
ESET TRANSITION TO DEFAULT
When the Reset transition to default is selected from the menu, all transitions
parameters (speed, still mode, start mode, A/V effect) are reset to the default
values specified in the menu Tools > Settings > Play-List > Pre-defined Values.
For more information refer to “Play-List – Predefined Values”, on page 159.