Grain Systems Bin Accessories PNEG-1802 - Manual (Page 24)

4. Inside Ladder Installation
24 PNEG-1802 Inside Ladder Instructions
4.00" Corrugated Farm Bin
Inside Ladder Installation (without Stir-Ator)
Inside Ladder Placement
The inside ladder package includes the ladders, starter brackets and double the amount of standoff
brackets. Begin by positioning the ladder directly under the manhole roof panel as shown in
Figure 4Q and
install starter brackets as shown in Figure 4R on Page 25 . Place the standoff brackets every 22" vertically
on the sidewall sheets using the horizontal seam holes for every other hole location. Use 5/16" x 3/4"
bin bolts to attach the standoff brackets to the sidewall of the grain bin.
Figure 4Q