Grain Systems Bin Accessories PNEG-1802 - Manual (Page 28)

4. Inside Ladder Installation
28 PNEG-1802 Inside Ladder Instructions
Inside Standoff Bracket and Ladder Placement
Refer to Figure 4V and follow the correct dimensions as shown. The top standoff bracket should be in line
with the top horizontal seam. Check the 4' ladder section to make sure the ladder rung dimples are to the
top surface and attach to the standoff bracket. (See general detail information section on PNEG-1420.)
Now all standoff brackets must be installed every 22" and attached to each 4' section required.
Figure 4V