Place the – Grain Systems Bin Accessories PNEG-1802 User Manual
Page 31
Advertising
![background image](/manuals/277561/31/background.png)
4. Inside Ladder Installation
PNEG-1802 Inside Ladder Instructions
31
Inside Starter Bracket and Ladder Placement
Refer to
and follow the correct dimensions as shown. The ladder starter brackets must be
located in line with the horizontal seam. Check the 4' ladder section to make sure the ladder rung dimples
are to the top surface and attach to the starter brackets using the hole located 1" from top of the ladder.
Now all standoff brackets must be installed every 22" and attached to each 4' section required.
NOTE: Refer to general detail information section on PNEG-1420 for additional details for standoff bracket
to ladder assembly.
Figure 4Y Inside Starter Bracket and Ladder Placement
Advertising