YSI 556 MPS - Manual (Page 18)

Probe Module Section 3
YSI 556 MPS YSI Incorporated Page 12
2.4.4 Charging the Optional Rechargeable Battery Pack
Figure 2.3 Charging the Battery Pack
Wall Power
Supply (YSI
6114)
Charger Adapter cable
(YSI 6119)
CAUTION: Do not use or store the battery pack at extreme
temperatures such as in strong direct sunlight, in cars during hot
weather or close to heaters.
1. Install the rechargeable battery pack into the instrument as
described in Section 2.4.3 Inserting Optional Rechargeable
Battery Pack.
2. Attach the charger adapter cable (YSI 6119) to the instrument.
NOTE: Wall power supplies for use in countries outside the US and
Canada can be found in Appendix B Instrument Accessories.
3. Insert the barrel connector of the wall power supply into the
barrel of the adapter cable.
CAUTION: Do not charge the battery pack continuously for more than
48 hours.
CAUTION: Do not drop or expose to water.
CAUTION: Do no charge the battery pack at temperatures below 0
°C
or above 40
°C.
4. Plug the wall power supply into an AC power outlet for
approximately 2 hours to obtain an 80% to 90% charge for 6
hours to get a full charge.