YSI 556 MPS - Manual (Page 76)

Section 9 Logging
YSI 556 MPS YSI Incorporated Page 70
To create a site list:
1. Go to the logging setup screen as described in Section 9.1
Accessing the Logging Setup Screen.
2. Use the arrow keys to highlight the Use site list selection.
3. Press the Enter key. A check mark is entered in the box next
to the use site list selection and two new entries appear on the
logging setup screen. See Figure 9.6 Logging Setup Screen.
Figure 9.6 Logging Setup Screen
4. Use the arrow keys to highlight the Store site number
selection.
5. If you are creating Multi-Site Descriptions (which require that
the site number be stored in your data files), press the Enter
key until a check mark appears in the box next to the store site
number selection.
OR Press the Enter key until the box next to the store site number selection
is empty, to create Single-Site Descriptions. The site name will be stored in
the header of your data files.
6. Use the arrow keys to highlight the Edit site list selection.
7. Press the Enter key. The edit site list screen is displayed. See
Figure 9.7 Edit Site List Screen. The Filename field is ready
for input.