YSI 556 MPS - Manual (Page 23)

Probe Module Section 3
YSI Incorporated YSI 556 MPS Page 17
NOTE: Press the key repeatedly in rapid succession to get to
the desired letter or number. If you pause for more than a
second, the cursor automatically scrolls to the right to prepare
for the next input.
EXAMPLE 1: Press the 6 key once and release to display an
uppercase “M”.
EXAMPLE 2: Press the 6 key four times and release to
display the number “6”.
EXAMPLE 3: Press the 6 key five times and stop to display a
lowercase “m”.
2. Press the left arrow key to go back and reenter a number or
setter that needs to be changed.
Press the Enter key when your entry is complete.
NOTE: The instrument software permits only numeric entries
in many instances, such as when setting the clock or entering
calibration parameters.
2.10 Instrument Reset
The YSI 556 MPS is characterized by sophisticated software that should
provide trouble-free operation. However, as with all high-capability
software packages, it is always possible that the user will encounter
circumstances in which the instrument does not respond to keypad entry. If
this occurs, the instrument function can easily be restored by removing and
then reapplying battery power. Simply remove either your C-cells or
rechargeable battery pack from the battery compartment, wait 30 seconds
and then replace the batteries. See Section 2.4 Batteries for battery
removal/reinstallation instructions.