4 relay output r1/r2/r3, 5 modbus configuration, Relay output r1/r2/r3 -4 – YSI DIQ/S 182 XT-4-MOD User Manual
Page 88: Modbus configuration -4
The SETTINGS menu
System 182 XT-4
5 - 4
ba76028e01
02/2012
Procedure:
Deleting inactive
datasets
5.4
Relay output R1/R2/R3
In these menus you can link sensors with the relay outputs of the
Universal Transmitter and adjust the outputs. The various setting
options are described in detail in the chapter 6 R
menu.
5.5
Modbus configuration
You can set the following Modbus interface parameters in this menu
(proceeding, see section 7.3).
Instrument address
Baud rate
Parity
All information needed to connect the DIQ/S 182 XT-4-MOD to a
Modbus plant is given in chapter 7 M
1
Open the SETTINGS menu with
s
.
2
Using
w
and
g
select and confirm the S0x Sensor menu
item (corresponding to the sensor number).
If the dataset is inactive, the following display appears:
3
Select Delete dataset with
d
and confirm with
g
.
The dialog window for the security prompt appears.
4
Select Delete dataset with
d
and confirm with
g
.
The inactive sensor is erased.