Xylem pH/ION 3400i ION SELECTIVE ELECTRODE ANALYZER - Manual (Page 43)

pH/ 3400i Operation
43
Message
StoFull StoFull StoFull StoFull
This message appears when all of the 500 storage locations are occu-
pied.
You have the following options:
3 Using <
▲> <▼>, set the required ID number
(1 ... 999).
4 Confirm with <RUN/ENTER>.
The measured values are stored. The instrument changes to
the measuring mode.
RCL AR ARng
No.
Auto
8
%
°F
4 2
°C TP
mV/pH
mol/L
TempError
LoBat
AutoCal DIN CalError
AutoCal TEC ConCal
Time Baud
Day.Month
Year
1
U
S
mg/L
% ppm
ISE
2 99 6
pH
2
Store
Ident
Saving the current measured value.
The oldest measured value (storage location 1)
will be overwritten by this Press
<RUN/ENTER>
Returning to the measuring mode without saving press any key
Outputting the data storage see
section 4.6.3
Clearing the memory see
section 4.6.4