Xylem pH/ION 3400i ION SELECTIVE ELECTRODE ANALYZER - Manual (Page 51)

pH/ 3400i Operation
51
Outputting the calibra-
tion protocol on the
interface
Sample printout:
1 Press the <RCL> key repeatedly until CAL SEr appears on the
display.
2 Press the <RUN/ENTER> key.
The calibration protocol for all measured variables is transmit-
ted to the interface. After the data transmission, the instrument
automatically switches to the last active measurement mode.
d
ARng ConCal
Store Auto
0
No.
LoBat
Day.Month
Year Ident
UpH
AR
%
°F
°C TP
mV/pH
mol/L
TempError AutoCal DIN CalError
AutoCal TEC
Time Baud
1
S
mg/L
% ppm
ISE
L C A
r s e
RCL
CALIBRATION PROTOCOL
02.03.01 14:19
Device No.: 12345678
Calibration pH
Cal time: 01.10.01 / 15:20
Cal interval: 7d
AutoCal TEC Tauto
Buffer 1 2.00
Buffer 2 4.01
Buffer 3 7.00 *
Buffer 4 10.00
C1 174.1 mV 25.0°C
C2 -133.3 mV 25.0°C
S1 -59.4 mV/pH
ASY1 - 4 mV
Probe: +++
CALIBRATION ISE
Cal time: 01.10.01 / 15:30
Std 1 10,00 mg/l
Std 2 20,00 mg/l
Std 3 50,00 mg/l
C1 0,5 mV 25.0°C
C2 8,4 mV 24.9°C
C3 21,2 mV 25.0°C
S1 26.4 mV
S2 32,1 mV
Probe: +++