Xylem pH/ION 3400i ION SELECTIVE ELECTRODE ANALYZER - Manual (Page 48)

Operation pH/ 3400i
48
Sample printout:
Outputting the
calibration data
on the display
No. 1:
09.03.99 17:10
pH 10.013 25 °C
Tman AR
Ident : 1
No. 2:
09.03.99 17:11
pH 10.104 24.7 °C
Tauto AR
Ident : 1
No. 3:
09.03.99 17:12
305.2 mV
Tauto
Ident : 13
...
1 Press the <RCL> key repeatedly until CAL disp appears on the
display.
2 Press the <RUN/ENTER> key.
The data of the last calibration of all measured variables ap-
pears in the following sequence:
z pH: Slope SLO and asymmetry ASY
z ISE: Slope of the electrode for calibration range I (SLO1)
and calibration range II (SLO2)
Information concerning the calibration procedure is output as
well.
ARng ConCal
Store Auto
0
No.
LoBat
Day.Month
Year Ident
UpH
AR
%
°F
°C TP
mV/pH
mol/L
TempError AutoCal DIN CalError
AutoCal TEC
Time Baud
1
S
mg/L
% ppm
ISE
L C A
p i s
RCL
d