Alpha Technologies XM2-300CE-HP - Manual (Page 21)

Pre-installation Inspection
Remove the XM2-300HP from the shipping container. Confirm that the power supply, including 1.
the Remote Temperature Sensor, and all other ordered options are included.
During shipping, components might shift. Carefully inspect the power supply and other contents
2.
for possible shipping-related failures, such as loosened or damaged connectors. If any items are
damaged or missing, contact Alpha Technologies or the shipping company immediately. Most
shipping companies have a short claim period.
Do not attempt to install a damaged power supply without first passing a complete pre-installation
3.
inspection and start-up test.
2.0 Installation
Read the Safety Precautions, Utility Power Connection Notes, and Grounding Connection Notes
(pages 8-13) before you install the power supply.
CAUTION!
Use the original shipping container if the XM2-300HP needs to be returned for service. If the original
container is not available, make sure the unit is well packed with at least three inches of shock-
absorbing material to prevent shipping damage.
See the “CableUPS Quick Start Guide” (Alpha P/N 017-877-B0) that accompanies each power supply. SAVE
THE ORIGINAL SHIPPING CONTAINER.
NOTE:
Do not use popcorn-type material. Alpha Technologies is not responsible for damage caused by
improper packaging of returned units.
CAUTION!
21 017-877-B1-001 Rev. A