Alpha Technologies XM2-300CE-HP - Manual (Page 35)

UP:
Scroll up in a branch of the menu tree. •
Increase a parameter (or value) while in the EDIT mode. •
4.0 Operation, continued
4.2 Using the Smart Display
All operational functions, system testing, setup menus, and alarms are available via the
illuminated display panel on the front of the XM2-300HP. Display functions are accessible by
pressing any of the four keys: ESCAPE, UP, DOWN, and ENTER.
Descriptions of the key functions are:
ESCAPE:
Move up one level in the menu tree. •
Leave the EDIT mode without saving the changes made to the selected menu item. •
DOWN:
Scroll down in a branch of the menu tree. •
Decrease a parameter (or value) while in the EDIT mode. •
ENTER:
Displays the next lower level in the menu tree. •
In the EDIT mode, ENTER accepts the new value into memory. •
Depressing ENTER for two seconds or longer initiates Display Test mode. Display Test •
mode switches all LED and LCD pixels (dots) on for several seconds.
SELF TEST: +
Press DOWN and ENTER simultaneously to manually enter a self test mode. A self test •
will be initiated and run between 5-180 minutes (set in the setup menu).
To cancel a self test in progress, simultaneously press DOWN and ENTER. •
ENTER
OPERATION NORMAL
OUTPUT VOLTAGE 90V
UP
DOWN
ESCAPE
Fig. 4-2, Smart Display Navigation
35 017-877-B1-001 Rev. A