DE-STA-CO IM-pAC AC Drive Getting Started Guide - Manual (Page 10)

10 IM-pAC Getting Started Guide
www.camcoindex.com | www.destaco.com Issue Number: 5
A standard Right Angle unit with cam and limit or proximity switch mounted on the
housing has a correct keyway position directly opposite the cam lobe. The cam and
switch may also be mounted on the reducer.
A standard Parallel unit with cam and limit or proximity switch mounted on the housing
has a correct keyway position directly opposite the output shaft, 90 degrees clockwise
from the cam lobe. The cam and switch may also be mounted on the reducer.
1.17 Drive default parameter list for a single preset speed appli-
cation
a) Default parameters are for motor 92C49952070000 1/3 hp. 230 V 60 hz motor. See
motor name plate.
NOTE