DE-STA-CO IM-pAC AC Drive Getting Started Guide - Manual (Page 5)

IM-pAC Getting Started Guide 5
Issue Number: 5 www.camcoindex.com | www.destaco.com
Declaration of Conformity
IMC
92C85797010000
92C85797020000
92B90482010000
92B90482020000
92B90482030000
92B90482040000
92B90482050000
92B90482060000
92B90482070000
92B90482080000
92B90482090000
The AC variable speed drive products listed above have been designed and
manufactured in accordance with the following European harmonised standards:
These products comply with the Low Voltage Directive 73/23/EEC, the Electromagnetic
Compatibility (EMC) Directive 89/336/EEC and the CE Marking Directive 93/68/EEC.
These electronic drive products are intended to be used with appropriate motors,
controllers, electrical protection components and other equipment to form
complete end products or systems. Compliance with safety and EMC regulations
depends upon installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by professional
assemblers who are familiar with requirements for safety and EMC. The
assembler is responsible for ensuring that the end product or system complies
with all the relevant laws in the country where it is to be used. Refer to the IM-pAC
Getting Started Guide. An EMC Data Sheet is also available giving detailed EMC
information.
EN 61800-5-1 Adjustable speed electrical power drive systems - safety requirements
- electrical, thermal and energy
EN 61800-3
Adjustable speed electrical power drive systems. EMC product
standard including specific test methods
EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards. Immunity
standard for industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards. Emission
standard for industrial environments
EN 61000-3-2 Electromagnetic compatibility (EMC), Limits, Limits for harmonic
current emissions (equipment input current <16A per phase)
EN 61000-3-3
Electromagnetic compatibility (EMC), Limits, Limitation of voltage
fluctuations and flicker in low-voltage supply systems for equipment
with rated current <16A