DE-STA-CO IM-pAC AC Drive Getting Started Guide - Manual (Page 43)

IM-pAC Getting Started Guide 43
Issue Number: 5 www.camcoindex.com | www.destaco.com
Re
ad
Me
F
irs
t
Instr
ucti
on
s
Sa
fety
Info
rm
atio
n
R
ati
ng
D
ata
Me
ch
an
ica
l
Inst
al
lati
on
El
e
c
tr
ic
a
l
Inst
a
llat
ion
Ke
yp
ad
an
d
D
ispl
ay
Par
am
eter
s
D
iag
no
stics
UL
Li
sti
ng
Info
rm
atio
n
0-20
: Current input 0 to 20mA (20mA full scale)
20-0
: Current input 20 to 0mA (0mA full scale)
4-20
: Current input 4 to 20mA with current loop loss (cL1) trip (20mA full scale)
20-4
: Current input 20 to 4mA with current loop loss (cL1) trip (4mA full scale)
4-.20
:Current input 4 to 20mA with no current loop loss (cL1) trip (20mA full scale)
20-.4
:Current input 20 to 4mA with no current loop loss (cL1) trip (4mA full scale)
VoLt
: 0 to 10V input
The above warnings also apply to the PCB edge connector for the optional Solutions
Modules. To allow a Solutions Module to be installed with an IM-pAC, a protective cover
must be removed to allow access to the PCB edge connector. See Figure 4-3 on page 38.
This protective cover provides protection from direct contact of the PCB edge connector by
the user. When this cover is installed and a Solutions Module fitted, the Solutions Module
provides the protection from direct contact by the user. If the Solutions Module is then
removed, this PCB edge connector becomes exposed. The user is required to provide
protection in this case, to protect against direct contact of this PCB edge connector.
WARNING
See Pr 05 on page 51 (Drive configuration) for terminal connection / set-up diagrams and
details.
NOTE
The digital inputs are positive logic only.
NOTE
The analog inputs are unipolar.
NOTE
T1 0V common
T2 Analog input 1 (A1), either voltage or current (see Pr 16)
Voltage: Current input 0 to 10V: mA as parameter range
Parameter range 4-20, 20-4, 0-20, 20-0, 4-.20, 20-.4, VoLt
Scaling
Input range automatically scaled to Pr 01 Minimum set
speed
/ Pr 02 Maximum set speed
Input impedance 200Ω (current): 100kΩ (voltage)
Resolution 0.1%
T3 +10V reference output
Maximum output current 5mA
T4 Analog input 2 (A2), either voltage or digital input
Voltage: Digital input 0 to +10V: 0 to +24V
Scaling (as voltage input)
Input range automatically scaled to Pr 01 Minimum set
speed
/ Pr 02 Maximum set speed
Resolution 0.1%
Input impedance 100kΩ (voltage): 6k8 (digital input)
Normal threshold voltage (as digital input) +10V (positive logic only)