DE-STA-CO IM-pAC AC Drive Getting Started Guide - Manual (Page 46)

46 IM-pAC Getting Started Guide
www.camcoindex.com | www.destaco.com Issue Number: 5
6 Keypad and Display
The keypad and display are used for the following:
•
Displaying the operating status of the drive
• Displaying a fault or trip code
• Reading and changing parameter values
• Stopping, starting and resetting the drive
Figure 6-1 Keypad and display
6.1 Programming keys
The MODE key is used to change the mode of operation of the drive.
The UP and DOWN keys are used to select parameters and edit their values. In
keypad mode, they are used to increase and decrease the speed of the motor.
6.2 Control keys
The START key is used to start the drive in keypad mode.
The STOP/RESET key is used to stop and reset the drive in keypad mode. It can
also be used to reset the drive in terminal mode.
M
M