3 mechanical installation, 1 transmitter assembly, Installation – Hach-Lange SI792 P, SI792x P, SI792x P-FF, SI792x P-PA User Manual User Manual
Page 19
Advertising
Installation
17
3.3 Mechanical installation
3.3.1
Transmitter assembly
Refer to
Figure 1
and the following instructions to assemble the
transmitter.
Figure 1 Instrument Components
1 Back enclosure
8 Strain relief (3x)
2 Optional conduit hardware
9 Filler plug (3x)
3 Conduit washer
10 Enclosure screw (4x)
4 Jumper (2x)
11 Display module
5 Cable tie (3x)
12 Hinge pin
6 Sealing insert
13 Hex nuts (5x)
7 Rubber reducer
14 Sealing plug (2x)
Advertising