2 ph/orp sensors with solution ground wiring, Installation – Hach-Lange SI792 P, SI792x P, SI792x P-FF, SI792x P-PA User Manual User Manual
Page 29
Advertising
Installation
27
3.5.3.2
pH/ORP sensors with solution ground wiring
Use
Figure 7
and
Table 4
to wire the sensor to the transmitter.
7
RTD (resistive temp
device)
red
green
8
RTD (resistive temp
device)
white
white
Figure 7 Wiring for pH/ORP sensors with solution ground
1 Wiring terminals—see
Table 4
2 Cable shield connection
Note: Do not connect to earth ground.
Table 3 Terminal assignments—pH/ORP sensors (Continued)
Advertising