2 configuration menu, Section 6.1.2, Operation—foundation fieldbus – Hach-Lange SI792 P, SI792x P, SI792x P-FF, SI792x P-PA User Manual User Manual
Page 44
Operation—Foundation Fieldbus
42
6.1.2
Configuration menu
Select the process variable
In.UnIT
pH (default) Range: –2.00–16.00 pH
ORP Range: –1500 mV–1000 mV
Select electrode type
ln.SnSR
Glass (default for EU version)
ISFET
pHD (default for standard version, with pHD and LCP sensors)
Select temperature unit
tc.UnIT
°C (default)
°F
Select temperature sensor
tc.rTD
PT100
PT1000 (default for EU version)
300 NTC (default for standard version, with pHD and LCP sensors)
Select temperature during measurement
tc.MEAS
Auto (default)
Manual
°C (default: 25 °C) Range: –20–150 °C
°F Range: –004–0392 °F
Select temperature during calibration
tc.CAL
Auto (default)
Manual
°C (default: 25 °C) Range: –20–100 °C
°F Range: –004–0392 °F
Select TC process medium
tc.LIN
–19.9–19.99 %/K (default: 00.00 %/K)