Luminex xPONENT 3.1 Rev 2 - Manual (Page 137)

Edit the IS 2.3 as .idt Files (Template)
NOTE: For additional information about .idt file editing, see the Overview:
Converting IS 2.3 .idt Files to xPONENT 3.1 .lxt Files section.
From the IS 2.3 system, edit a used template by perform the following steps:
1. From the Acq. Detail tab, click Edit Template on the Developer Workbench toolbar. An
Open Template dialog box opens.
NOTE: Associated batches will display a "lock" icon in the ID column.
FIGURE 53. Open Template Dialog Box
2. Select the template to edit and click Edit. The Select Template Information Wizard
displays the selected template.
FIGURE 54. Select Template Information Wizard
3. Edit the template name and change the version number of the template.
NOTE: Changing the template name is required.
NOTE: The version number must not exceed four digits.
4. Using the Next and Back buttons from the bottom of the Template Setup Wizard, locate
the information that is to be changed.
5. Once the information has been changed, click the Save button and then the Close
button. The edited template is now saved under the new template name.
xPONENT ® 3.1 Rev. 2
124