Luminex xPONENT 3.1 Rev 2 - Manual (Page 60)

New Std/Ctrl - Opens the Std/Ctrl Details tab. For more information, see the “Std/Ctrl
Details Tab” section.
Plate Layout - Opens the Report dialog box, which includes the Plate Layout Report. For
an example, see the Protocols Plate Layout Report image below.
FIGURE 27. Protocols Plate Layout Report
Delete - Opens the Delete Protocol dialog box to delete a protocol selected in the Installed
Protocol list. Click Yes to delete the selected protocol.
Import - Opens the Open dialog box to select a protocol (.lxt file) to import. Navigate to the
protocol file you wish to import and click Open.
Export - Opens the Save As dialog box to export a selected protocol. Choose an export
destination and name, and click Save.
View - Opens the Settings tab to view the protocol. Click Next to advance to the Analytes
tab, and Next again to advance to the Plate Layout tab. Click Close at any of the three tabs
to return to the main Protocols tab, or Back to return to a preceding tab. The View option
does not allow any changing of the protocol settings.
Settings Tab
Use this tab to name your new batch and configure acquisition settings.
Touring the Software
47