Luminex xPONENT 3.1 Rev 2 - Manual (Page 94)

FIGURE 47. Alert Options Tab
Alert Options - Offers three check boxes for each alert - Dialog, Email, and Sound. This
section displays the following events:
• Locked User - The user is locked out of the login.
• Batch Complete - The batch is finished.
• Warmup Complete - The laser is warmed up.
• Heater In Range - The plate heater is warmed to the designated range.
• Scheduled Maintenance - A scheduled maintenance routine is now due.
• Low Bead Count Detected - A bead count below the accepted range is encountered.
• Sheath Empty - A problem with the sheath fluid is encountered.
• Routine Complete - The currently running routine is complete.
• Delta Cal Temp Exceeded Tolerance During Batch - The delta cal temperature fell
outside the designated range during the running of the batch.
Select the appropriate check boxes to display a pop-up message, send an email, or play a
sound to alert you when the event occurs. All check boxes are selected by default. Cancel
and Save buttons display if you change a setting.
Speakers Attached/Speakers Not Attached - Enables sounds to be played through
speakers. Click this button if you have speakers attached to your system. The button title will
alternate between attached/not attached status when you click it.
Setup Email - Opens the Setup Email dialog box.
Touring the Software
81