External control (i/o) signal connection, Enforce, 7 external-control signal connection – FEC DSP1500 (SAN3) User Manual
Page 41
PAGE ４－9
enFORCE
Operation Manual
4.7 External-Control Signal Connection
Mating Plug
Manufacturer：Honda Tsushin Kougyo (HONDA)
Vertical Housing Part No.:
MR-34L
Male Insert Part No.:
MR-34M
(See Appendix A for connecting cable part numbers)
4.7.1 ＰＬＣ Ｉ／Ｆ（ＡＸＩＳ Ｉ／Ｏ）Signal
IN:
Input
Signal OUT: Output Signal NC: Normally Closed NO: Normally Open
Only when the MANUAL signal is ON for inputting in to（ ）.
Pin No.
Signal Name
IN/OUT
Description
1
STOP
IN (N.C.) Stops System operation upon loss of signal.
2
RESET
IN (N.O.) Resets to the initial condition. (>100 ms pulse)
3 MANUAL
IN
(N.O.)
Manual
mode.
4
START
IN (N.O.) Starts Press Cycle.
5
BYPASS
IN (N.O.) Disables Press operation.
6
SYNC COM
Synchronizing signal common.
7
SYNC COM
Use only for synchronizing signal common.
8
SYNC
I N / O U T Synchronizing signal (5V TTL)
9
NEAR-ORG/BANK1
IN (N.O.) Near Origin sensor input/Bank 1 Select.(Use for special applications)
10 OPTION
IN
IN
(N.O.)
※
Use when inputting option and special specification
11
BANK0
IN (N.O.) Bank 0 Select input
12
SYNC
I N / O U T Synchronizing signal (5V TTL)
13
IN COMMON
Input signal common. (+12 ~ +24VDC)
14
SELF CHECK OFF
IN (N.O.) Disable the self-check function.
15
CW LIMIT
IN (N.C.) CW limit sensor input.（Advance limit）
16
CCW LIMIT
IN (N.C.) CCW limit sensor input.（Return limit）
17
WORK SELECT 0
IN (N.O.)
18
WORK SELECT 1
IN (N.O.)
19
WORK SELECT 2
IN (N.O.)
20
WORK SELECT 3
IN (N.O.)
21
WORK SELECT 4
IN (N.O.)
These 5 inputs form a binary code which is capable of selecting up to
32 different parameters.
(In Manual Mode these inputs become selecting signals for advance,
return, home-position search and home-position return operations.)
22 OUT
DATA11
OUT (N.O.) Echo of Bank 0 Select Signal
23
OUT COMMON
Output signal common. (0ＶDV)
24 OUT
DATA0
OUT (N.O.)
25 OUT
DATA1
OUT (N.O.)
26 OUT
DATA2
OUT (N.O.)
27 OUT
DATA3
OUT (N.O.)
28 OUT
DATA4
OUT (N.O.)
29 OUT
DATA5
OUT (N.O.)
30 OUT
DATA6
OUT (N.O.)
31 OUT
DATA7
OUT (N.O.)
32 OUT
DATA8
OUT (N.O.)
33 OUT
DATA9
OUT (N.O.)
34 OUT
DATA10
OUT (N.O.)
Outputs system condition signals based on which Bank is selected.
Echo of Bank 1 Select Signal
Chapter 4: System Setup and Wiring