FEC DSP1500 (SAN3) User Manual
Page 98
Advertising
PAGE ６－36
enFORCE
Operation Manual
1 Step Operation - 1
ST
H/L Check
At [23: 1
ST
Step Distance], the judging of an abnormally high or low load is possible.
If a load value greater than [15: 1
ST
Step Load] is sensed before the press exceeds
[23: 1
ST
Step Distance], a “1
ST
Rate Low” reject will occur and press operation will
stop.
Upon reaching [23: 1
ST
Step Distance], if [17: Threshold Load] has not been
reached, a “1
ST
Rate High” reject will occur and press operation will stop.
Chapter 6: System Operation
1
ST
Low Check Judgment Zone
(1
ST
Rate High Reject)
1
ST
High Check Judgment Zone
(1
ST
Rate Low Reject)
Load
[15] 1
st
Load
[23] 1
st
Distance
[17] Threshold
Distance
Advertising