FEC DSP1500 Main Unit - Manual (Page 120)

enFORCE DSP1500 Main Unit Hardware Manual
(Rev. 4.0) PAGE 5 - 80
Chapter 5: Control Interfaces
Property of the MSG command is shown below. (Right Click in MSG command)
Message Type CIP Generic
Service Type Get Attribute Single
Service Code E
Class B0
Instance 1
Attribute 1~5
Destination
The controller tag “C” should be
selected
Note: Each message command can only handle 400 bytes. If more than 400 bytes of data
needs to be transferred, another controller tag needs be added (Read_tag) for the buffer and
another MSG command needs be added. The second MSG command should have its attribute
as 2 (and so on up to a maximum of 5 for up to 2000 bytes of message data).
DSP1500: