FEC DSP1500 Main Unit - Manual (Page 76)

enFORCE DSP1500 Main Unit Hardware Manual
(Rev. 4.0) PAGE 5 - 36
Chapter 5: Control Interfaces
5.6.4 Ouput Signals (Word 01 ~ Word 16)
The Main Unit is capable of providing over 570 Output signals to indicate the status of the Main
Unit and of all the DSP1500 SAN Controllers connected to it (up to 31 controllers). These
signals are user configurable using the DSP User Console Software and may be programmed
on any designated bit. See Section 5.3.4 for available output signals.
Word No. Bit Signal Connection
FEC Main
Description
Bank Bit
Output
Word
No.01
Standard
Setting
0bit Total Reject NO 1 1 Output when result is a [Total Reject].
1bit Total Accept NO 1 2 Output when result is a [Total Accept]
2bit Abnormal NO 1 3 Output when a Press abnormal occurs
3bit Ready NO 1 4 Output when Press operation is ready.
4bit Busy NO 1 5 Output while Press is operating.
5bit End NO 1 6 Output when Press operation ends.
6bit Seq/Press Output 0 NO 1 7 Output confirmation of SEQUENCE
SELECT 0~4 input selections.
When in manual (Jog) operation these
bits are Output confirmation of the Press
Select 0~4 input selections.
7bit Seq/Press Output 1 NO 1 8
8bit Seq/Press Output 2 NO 1 9
9bit Seq/Press Output 3 NO 1 10
10bit Seq/Press Output 4 NO 1 11
11bit Press in Bypass NO 1 12 Output when any press is in Bypass
12bit Press No.1 Accept NO 1 13 Press NO.1 pressing is accepted.
13bit Press No.1 Reject NO 1 14 Press NO.1 pressing is rejected.
14bit Press No.1 ABN. NO 1 15 Press NO.1 is abnormal.
15bit Press No.1 BYP NO 1 16 Press NO.1 is in bypass.
Output
Word
No.02
Example of
output
signal
setting
0bit Press No.2 Accept NO 1 17 Press NO.2 pressing is accepted.
1bit Press No.2 Reject NO 1 18 Press NO.2 pressing is rejected.
2bit Press No.2 ABN NO 1 19 Press NO.2 is abnormal.
3bit Press No.2 BYP NO 1 20 Press NO.2 is in bypass.
4bit Press No.3 Accept NO 1 21 Press NO.3 pressing is accepted.
5bit Press No.3 Reject NO 1 22 Press NO.3 pressing is rejected.
6bit Press No.3 ABN NO 1 23 Press NO.3 is abnormal.
7bit Press No.3 BYP NO 1 24 Press NO.3 is in bypass.
8bit Press No.4 Accept NO 1 25 Press NO.4 pressing is accepted.
9bit Press No.4 Reject NO 1 26 Press NO.4 pressing is rejected.
10bit Press No.4 ABN. NO 1 27 Press NO.4 is abnormal.
11bit Press No.4 BYP NO 1 28 Press NO.4 is in bypass.
12bit Press No.5 Accept NO 1 29 Press NO.5 pressing is accepted.
13bit Press No.5 Reject NO 1 30 Press NO.5 pressing is rejected.
14bit Press No.5 ABN. NO 1 31 Press NO.5 is abnormal.
15bit Press No.5 BYP NO 1 32 Press NO.5 is in bypass.
Output
Word
No.03
Example of
output
signal
setting
0bit Press No.6 Accept NO 2 1 Press NO.6 pressing is accepted.
1bit Press No.6 Reject NO 2 2 Press NO.6 pressing is rejected.
2bit Press No.6 ABN NO 2 3 Press NO.6 is abnormal.
3bit Press No.6 BYP NO 2 4 Press NO.6 is in bypass.
4bit Press No.7 Accept NO 2 5 Press NO.7 pressing is accepted.
5bit Press No.7 Reject NO 2 6 Press NO.7 pressing is rejected.
6bit Press No.7 ABN NO 2 7 Press NO.7 is abnormal.
7bit Press No.7 BYP NO 2 8 Press NO.7 is in bypass.
8bit Press No.8 Accept NO 2 9 Press NO.8 pressing is accepted.
9bit Press No.8 Reject NO 2 10 Press NO.8 pressing is rejected.
10bit Press No.8 ABN. NO 2 11 Press NO.8 is abnormal.
11bit Press No.8 BYP NO 2 12 Press NO.8 is in bypass.
12bit Press No.9 Accept NO 2 13 Press NO.9 pressing is accepted.
13bit Press No.9 Reject NO 2 14 Press NO.9 pressing is rejected.
14bit Press No.9 ABN. NO 2 15 Press NO.9 is abnormal.
15bit Press No.9 BYP NO 2 16 Press NO.9 is in bypass.
：
Word No. Bit Signal Connection Description
Output
Word
No.16
0bit NO
… …
15bit NO