FEC DSP1500 Main Unit - Manual (Page 85)

enFORCE DSP1500 Main Unit Hardware Manual
PAGE 5 - 45 (Rev. 4.0)
Chapter 5: Control Interfaces
5.8 CC-Link
®
Interface (Version 1)
The Mitsubishi CC-Link communication interface allows slave connection to an industrial Mitsubishi
CC-Link network. FEC has a partner license with Mitsubishi for the DSP1500 system for connection
on the CC-Link network. Mitsubishi CC-Link allows industrial devices to be controlled over an open
network architecture enabling device connection at various locations in the field. This “Fieldbus”
technology reduces hardwiring/cabling & provides ease of installation. It can interface with many
devices such as limit switches, sensors, directional valves, motor starters, bar code readers,
process sensors, frequency drives, etc. The network can have up to 64 stations. Maximum I/O data
is 128 inputs & 128 outputs (actual usable I/O is 112).
NOTE: The FEC CC-Link module is configured as a “Remote Device Station” when setting up the
parameters in the PLC program.
For detailed information on the Mitsubishi CC-Link Network, see the Mitsubishi User Manual
#13J872 Control & Communication - Link System Master / Local Module.
Item Description
1 CC-Link Connector
2 Station Number Setting Switch
3 Baud Rate Setting Switch
4 Occupied Station Setting Switch
5 Status LEDs (4)
OCCUPIED STATION
SETTING
3
5
1
4
2
HOME