FEC DSP1500 Main Unit - Manual (Page 4)

iv
Thank you for purchasing our Electric Servo Press - DSP1500 System.
This instruction manual describes the procedures for installation, wiring, handling and
actions to be taken in case of any failure.
◆ This instruction manual shall be delivered to the end user who operates the equipment.
◆ Read all instructions before use and always keep this instruction manual with the
equipment.
◆ Items not described in this instruction manual shall be considered “unavailable”.
◆ The product specification and appearance described in this instruction manual is subject to
change without notice.
◆ All rights reserved. Any disclosure, copying, distribution, or use of the information
contained herein for other than its intended purpose, is strictly prohibited.
For the safety of operator and equipment
Please confirm the following when unpacking this equipment:
◆ Ensure that you received the correct model as ordered.
◆ Ensure that there are no missing parts.
◆ Check for any damage caused during transportation.
Points to check when unpacking
◆ It is important for you to read all “Safety Precautions” before using the equipment, and
understand and observe all instructions and recommendations included in this manual.
◆ Read all instructions and recommendations included in this manual, understand the
functions and performance of this servo press, and correctly use this machine.
◆ Wiring and parameter setting shall only be conducted by a qualified professional.
◆ Never conduct a withstand voltage test or insulation resistance test on this equipment.
◆ Indicate the following on all instruction manuals that use this equipment.
”This equipment is capable of high voltages hazardous to human life.”
Introduction