FEC DSP1500 Main Unit - Manual (Page 124)

enFORCE DSP1500 Main Unit Hardware Manual
(Rev. 4.0) PAGE 6 - 2
Chapter 6: Troubleshooting
6.1 Abnormals
The Main Unit is capable of giving unit fault status to the DSP1500 User Console. This fault can be
read and displayed by the User Console software. (See the User Console manual for more
information on where to access this information)
Abnormal Description
Home Set Has Not Completed A start command was issued before a
Home Search was completed.
Press Is not Connected A press defined in the sequence is not
connected.
Press Is Abnormal An abnormal exists in at least 1 of the
connected presses.
No Press Number In Sequence No press has been defined in the
sequence.
Selected Sequence Is Not Programmed A sequence with no information was
selected.
Sequence Program Error An error exists in the sequence
program selected.