Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 127)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 125
Exercise and Capture LeCroy Corporation
1. Click the down arrow on a Target SAS Address block in a completed
Initiator Emulator program, then choose Find New Device.
Find New
Cursor
Device
Figure 2.116: SAS: Find SAS Devices Select
Choosing Find New Device opens the Device Identifier dialog.
Figure 2.117: SAS: Device Identifier Dialog
SAS vs. SATA: SATA dialog does not show Find section (All Info and SAS Address).
SATA dialog has devices D1 to D4 and does not show T1 to T4.
SATA dialog does not show Supported Pages and Subpages.
SATA dialog lists Word, Description and Value, not Offset, Field, Length, and Value.
SATA dialog lists Device Type, Serial Number, and Spec Version, not Protocol Supported
(SSP, SMP, STP)