Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 419)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 417
Sierra Trainer Generation Language LeCroy Corporation
Predefined Constants
WF_OPEN_RESPONSE WF_OPEN_ACCEPT
WF_OPEN_REJECT
WF_ALIGN WF_ALIGN_0
WF_ALIGN_1
WF_ALIGN_2
WF_ALIGN_3
WF_NOTIFY WF_NOTIFY_ENABLE_SPINUP
WF_NOTIFY_RESERVED_0
WF_NOTIFY_RESERVED_1
WF_NOTIFY_RESERVED_2
WF_BROADCAST WF_BROADCAST_CHANGE
WF_BROADCAST_RESERVED_0
WF_BROADCAST_RESERVED_1
WF_BROADCAST_RESERVED_2
WF_BROADCAST_RESERVED_3
WF_BROADCAST_RESERVED_4
WF_BROADCAST_RESERVED_CHANGE_0
WF_BROADCAST_RESERVED_CHANGE_1
WF_SAS_PS_REQ WF_PS_REQ_PARTIAL
WF_PS_REQ_SLUMBER
WF_SAS_PS_STATUS WF_PS_ACK
WF_PS_ACK
Predefined Constant Internal Value
GEN_MODE_ERROR 0
GEN_MODE_SATA_HOST 1
GEN_MODE_SATA_DEVICE 2
GEN_MODE_SAS_INITIATOR 3
GEN_MODE_SAS_TARGET 4
GEN_LINK_SPEED_1_5G 00
GEN_LINK_SPEED_3G 01
GEN_LINK_SPEED_6G 10
SCRAMBLING_MODE_NONE 0
SCRAMBLING_MODE_SAS 1
SCRAMBLING_MODE_SATA 2
Wait Command Group Group Contents