Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 139)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 137
Exercise and Capture LeCroy Corporation
Incoming Open Primitive Response
To set a response to an incoming Open frame, check Incoming Open Frame Response,
select a Primitive, and enter a value for Delay.
Figure 2.134: SAS: Open Primitive Response
Enable First Burst
Check the Enable First Burst box to specify to transfer the first burst data as defined by
the First Burst Size field in the Advanced Initiator Setting dialog. See Figure 2.142: on
page 143.
Task Attribute
Choose a task attribute of Simple, Head of Queue, Ordered, or ACA by checking the
corresponding option button.
Outgoing SCSI Frame Settings
Before selecting Outgoing Frame Settings, select the Types Of Frames and the
Frame Number on which to inject an error. Then check Outgoing Frame in the Generate
Error On area and then the Settings button to display the Outgoing Frame Setting dialog.
Figure 2.135: SAS: Outgoing Frame Setting Dialog SCSI