Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 144)

LeCroy Corporation Exercise and Capture
142 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Pattern Generator
You can select a Pattern Generation file.
Initiator Emulator
You can run an Initiator Emulator while setting:
 Auto stop exerciser when Analyzer stops
 SAS Address
 Data Frame Payload Size
 Frame Receive Timeout
 Logical Block Size
 ATA Command Execution Timeout
 Send NOTIFY ENABLE SPINUP primitive
Check Autostop exerciser when Analyzer Stopped to halt the Initiator Emulator when
the Analyzer stops. If unchecked, the Exerciser continues to run even after the Analyzer
stops.
Queue Settings
Click the Queue Settings button to display the Queue Settings dialog and specify:
 Queue Depth
 NCQ Error Recovery
 Queued/Non‐Queued Items Status
 NCQ/Queue Command Timeout
Figure 2.141: Queue Setting Dialog