Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 214)

LeCroy Corporation Toolbars
212 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
 1. Pre‐trig capturing (trig is 50%)
2. Trig point (shown by red bar; 36% pre trig was captured)
3. Post‐trig capturing (50% post‐trig was captured and capturing has stopped)
Note: If sample capture occurs with more than one unit active, additional Port Status windows display.
Toolbars
Enabling Tool Bars
To customize the Viewer Display workspace, you can enable and reposition the available
toolbars. To display or hide toolbars, select View > Toolbar, then check or uncheck
toolbars.
Toolbars are:
 Main
 Viewer
 Cursor Position
 Layers
 Decode
 Channels (Unit 1, Unit2, and so on)
 Viewer Setting
 View Type
Once enabled, the toolbars can dock at the Viewer Display window or float on the
windows desktop.