Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual User Manual
Page 30
LeCroy Corporation
Expandability
28
Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
The following Select Device dialog displays. The colors in the ‘Location’ column mean the
following:
Red: Firmware and/or BusEngine components need to be updated to the latest
version
Light Blue: The device is ready to be connected.
Yellow: The device is not chained or cascaded.
Figure 1.14: Select Device Dialog
Note:
Click Refresh Device List to display all the devices on the network.
The Select Device dialog displays the following buttons:
Set Alias Name
Click Set Alias Name to display the Set device alias name dialog as shown below.
Figure 1.15: Set Device Alias Name Dialog
Disconnect
Click Disconnect to disconnect a device.
Add Device...
Click Add Device to add a device with a static IP address.