Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 65)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 63
Easy Mode (Pre‐Defined Setups) LeCroy Corporation
#7 Frame Type Error: Wrong frame type.
#8 Frame Length Error: Reported frame length is different than actual frame length:
#9 Frame Direction Error: Wrong frame direction. For example, Register Device to Host
coming from the Host.
#10 CRC Error: CRC error detected.
#11 ACK/NAK Error: ACK or NAK primitive missing or encountered unexpectedly.
STP Frame (SAS only)
Double‐click STP Frame to open the FIS Type dialog.
Figure 2.22: FIS Pattern Dialog
SAS vs. SATA: Not available in SATA.
Click the down arrow next to the Type drop‐down list box, choose an FIS type to capture
or exclude, and click OK. Repeat for additional types.
Available FIS Types:
 Register Host to Device
 Register Device to Host
 Set Device Bits
 DMA Activate
 DMA Setup
 BIST
 PIO Setup
 Data
 Vendor