Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 221)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 219
Status Bar LeCroy Corporation
Status Bar
The Status bar is located at the bottom of the main display window.
Search Status
The rightmost segment displays the current search direction: Fwd (forward) or
Bwd (backward). Change the search direction from the Search Menu or double‐click the
Search Status segment.
Filtering
The Filtering menu and options allow you to modify data in the sample viewer display to
exclude packets with a set of user‐defined patterns and show the results in all views.
To set up filtering, you must have a viewer display open.
The Filtering menu has the options:
 Enable Filtering (see “Enable Filter” on page 229 )
 Filtering (see “Filter Setup” on page 220 )
 Link Layer (SAS)
 Transport Layer (SAS)
 Application Layer (SAS)
 Physical Layer (SATA)
 FIS Layer (SATA)
 Command Layer (SATA)
 Filter Idles (see “Filter Idle” on page 230 )