Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 58)

LeCroy Corporation Easy Mode (Pre‐Defined Setups)
56 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Run an Example Analysis Project
To run an example project:
1. Select File > Open.
2. Locate example analysis projects by looking in the Examples folder. Examples are
available for AdvanceCaptr, EasyCaptr, Exerciser, PatternGenerator, Samples,
Target Emulator, and User Define Decoding Script.
3. In the EasyCaptr folder, choose an example *.sac file and click Open to display the
example project dialog.
Figure 2.13: File Open Dialog
Figure 2.14: SAS: Sample Protocol Analysis Project
SAS vs. SATA: For Pattern Parameters, SATA Dialog adds FIS, FIS Pattern, and ATA
Command Pattern and does not have STP Frame, SSP Frame, SMP Frame, and Address
Frame.
4. Click the Record button to execute the pre‐defined example.