Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 152)

LeCroy Corporation Exercise and Capture
150 Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual
Power Management Settings
Click the Power Management Setting tab in the Advanced Host Setting dialog to specify
the settings in the editable fields
.
Figure 2.151: SATA: Power Management Settings
Set parameters for Host and/or Device initiated power management.
Project Settings
Set project settings in the Project Settings tab ( See “Project Settings” on page 92. ).
Note: When using the Exerciser, channel 2 is not available and is grey.
Creating a Data Block
You can create the following types of data blocks, for use with data fields:
 Random data pattern
 Custom data pattern specifically for your application
 Counter data pattern
 Walking bit pattern
To create a data block, click the Default Data Block button on the Main toolbar,
or select Configuration > Data Block to open the Data Block dialog box as shown in
Figure 2.152