Teledyne LeCroy STX M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 421)

Sierra M6‐4 SAS/SATA Protocol Analyzer User Manual 419
Sierra Trainer Generation Language LeCroy Corporation
PauseTrnScrmblr. 0 When set, the generator pauses the Idle scrambler of
Train/TrainDone pattern.
ReconnectOnRun 0 When “AdvanceConnect” and “ReconnectOnRun”
are set, the “Connect” command forces the Trainer
to disconnect the physical link before executing the
“Connect” command.
When “AdvanceConnect” is not set, this setting does
not affect the Trainer.
AdvanceConnect 0 When set, the Trainer uses the
“PHY Capability” and “SupportSNW” settings,
instead of the “Set Speed” settings, for executing the
“Connect” command.
OutputOffAfterDC On
Off If set to On, Trainer puts DC Idle on line when it
detects sync lost on the link.
Setting
Default
Value
Description